ProTek RC 2S 130C Low IR Si-Graphene + HV Shorty LiPo Battery (7.6V/6400mAh) w/5mm Connectors (ROAR Approved)

Register or login to view pricing



Calculate Shipping



Fixed Rate By Invoice Total - $14.99
FIXED RATE SHIPPING (EXCLUDING DANGEROUS GOODS , AIRCRAFT KITS , 1/5 SCALE CARS & OVER LENGTH ITEMS )
Free pick-up from store - $0.00
Warehouse pick available

w/5mm Connectors (ROAR Approved)

ProTek RC 2 Cell LiPo Battery: 7.6V High-Voltage Performance

The ProTek R/C 2S 130C Graphene + HV 6400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 219 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage.

This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike.

Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best.

Features:

  • Lighter than a hardcase 2S LiPo pack of equal capacity
  • More runtime, with a dramatic increase in voltage and punch
  • Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
  • Improved efficiency, lower operating temperatures, and lower internal resistance!
  • Perfect for stock class racers looking to shave grams
  • 10C max charge rates - 1C charge rate recommended for longest life

IMPORTANT LITHIUM POLYMER SAFETY INFORMATION

  • DO NOT leave a battery in your model when charging
  • DO NOT leave lithium batteries unattended when charging
  • ALWAYS balance charge lithium battery
  • ALWAYS use a LiPo Safe charging bag/box
  • YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
  • YOU MUST not over discharge lithium battery packs
  • READ & UNDERSTAND the instructions carefully before operating this battery


NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.

Includes:

  • (1) ProTek R/C Battery
  • (2) 5mm to 4mm Bullet Reducers
  • (2) 5mm Bullet Connectors
  • (1) 2mm Balance Bullet Connector

Specifications

Nominal Voltage: 7.6V (2S)
Capacity: 6400mAh
Maximum Charge Rate: 10C (64A)
Discharge Rates  
Continuous: (Not Available)
Peak: 130C
Cell Configuration: 2S2P
Watt Hours: 48.64Wh
ROAR Approved: Yes
Connectors  
Battery: 5mm Bullet
Balance: 2mm Bullet
Dimensions (LxWxH): 1.85x3.78x0.98in (47x96x25mm)
Weight: 7.72oz (219g)

(PTK-5114-22)

SKU PTK-5114-22
Barcode # 707470762116
Brand PROTEK RC

More From This Category


ProTek RC 8x14x4mm Metal Shielded "Speed" Bearing (4)

ProTek RC 8x14x4mm Metal Shielded "Speed" Bearing (4)

SKU: PTK-10020

Register or login to view pricing

ProTek RC 14x25.8x6mm Ceramic "MX-Speed" Rear Engine Bearing

ProTek RC 14x25.8x6mm Ceramic "MX-Speed" Rear Engine Bearing

SKU: PTK-10097

Register or login to view pricing

ProTek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH)

ProTek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH)

SKU: PTK-5332

Register or login to view pricing

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)

ProTek RC 30x30x10mm Aluminum High Speed HV Cooling Fan (Silver/Black)

SKU: PTK-2111

Register or login to view pricing

ProTek RC 5x9.75" Magnetic Screw Catcher

ProTek RC 5x9.75" Magnetic Screw Catcher

SKU: PTK-8153

Register or login to view pricing

ProTek RC "TruTorque" HSS Steel Metric Ball End Replacement Tip (2.5mm)

ProTek RC "TruTorque" HSS Steel Metric Ball End Replacement Tip (2.5mm)

SKU: PTK-8237

Register or login to view pricing

ProTek RC 6mm Black Heat Shrink Tubing (1 Meter)

ProTek RC 6mm Black Heat Shrink Tubing (1 Meter)

SKU: PTK-5411

Register or login to view pricing

ProTek RC TLR 22X-4 "Grade 5" Titanium Turnbuckle Kit

ProTek RC TLR 22X-4 "Grade 5" Titanium Turnbuckle Kit

SKU: PTK-T-7021

Register or login to view pricing

ProTek RC "TruTorque" HSS Steel Metric Hex Replacement Tip (1.5mm)

ProTek RC "TruTorque" HSS Steel Metric Hex Replacement Tip (1.5mm)

SKU: PTK-8230

Register or login to view pricing

ProTek RC Samurai S03 & R03 Back Cover Plate

ProTek RC Samurai S03 & R03 Back Cover Plate

SKU: PTK-2613

Register or login to view pricing

ProTek RC 8-32 "High Strength" Standard ZP Steel Lock Nut (20)

ProTek RC 8-32 "High Strength" Standard ZP Steel Lock Nut (20)

SKU: PTK-H-5604

Register or login to view pricing

ProTek RC 8x12x0.1mm Pinion Gear Washer (10)

ProTek RC 8x12x0.1mm Pinion Gear Washer (10)

SKU: PTK-H-5909

Register or login to view pricing